You’ll have to source these yourself, but you will find hundreds of brand new, modern, original ZX Spectrum games to play free or buy at itch.io/games/tag-zx-spectrum. Accompanying these should be any ZX Spectrum TAP or TZX files you wish to run on the Raspberry Pi. The implication was that other people had done the hard work of getting Mac OS to run in emulation on the Raspberry Pi and all I had to do was run a script. You can then copy those files (there should be 18) to the root of your formatted SD card.You’ll notice it already has a kernel.img file - replace this with the one optimized for your Pi (simply copy and paste). Extract the allfiles.zip into a new directory on your computer.Three options are available, depending on whether your Pi is an ARMv6, ARMv7, or ARMv8 model. Next, grab the optimized kernel.img file for your model.Start by heading to and downloading allfiles.zip (linked to “All files needed in a ZIP file”).

Be careful as there are some deadly high voltages floating around. Many of the NEWER PI's including the Pi Zero have an output on the board but then you have to work out where the video INPUT is on the Mac's ANALOG board. You should also have the Raspberry Pi connected to a suitable display. The EARLY (512mb ) Raspberry Pi's had RCA phono jacks with composite video output. You should also have a USB keyboard attached do this before powering on or else the device will not be detected (the same goes for your game controller). How to Install ZXBaremulator on Raspberry Piīefore starting, ensure you have a compatible Raspberry Pi model and suitable SD card, formatted in FAT.